NETSCOUT OneTouch AT G2模塊失去了FI-7000 FiberInspector Pro的功能
發布日期:2018年07月24日
瀏覽次數:9次
編輯:深圳連訊
NETSCOUT OneTouch AT G2模塊失去了FI-7000 FiberInspector ?Pro的功能。
深圳連訊達簡單為您說明:
1、如果你是FI-7000或者FI2-7000使用Onetouch AT 的模塊如果1TG2-3000,1TG2-1500的模塊,那么會就會變成一個Onetouch AT的網絡測試儀。
2、如果你把1TG2-3000,1TG2-1500的模塊取下來,再裝FI-7000的視頻探頭,你將會發現他不在工作。
3、你需要用DSX2-8000或者DSX2-5000的模塊重裝。才能顯示FI-7000的功能。
If you insert a OneTouch AT module in the back of your FI-7000 (Versiv mainframe), the main frame is turned into an excellent network troubleshooting tool. However, when you remove the OneTouch AT module, the main frame still thinks it is a OneTouch AT and you no longer have the ability to carry out automated fiber inspection.
Putting a DSX-5000, CertiFiber Pro or OptiFiber Pro module in the back will return it to allow automated fiber inspection. If you do not have one of these modules, don’t worry.
- Power off the Versiv main frame
- Remove the OneTouch AT module
- Hold down the?HOME key.
- Keep it held down while you power on the mainframe.
- When you see the screen change from OneTouch AT to Versiv, let go of the HOME key.
Your FI-7000 is now operational again.
本文關鍵字: FI-7000,
FiberInspector,
Onetouch AT G2
原創標題:NETSCOUT OneTouch AT G2模塊失去了FI-7000 FiberInspector Pro的功能
原文鏈接:http://m.qqmmqq.cn/archives/versiv-fi7000.html
版權說明:本文為深圳市連訊達電子技術開發有限公司官網(m.qqmmqq.cn)版權所有。如果您需要轉載,請注明出處并保留原文鏈接!如為轉載文章會注明文章出處,轉載文章不代表本公司觀點。對于某些同行無恥惡意抄襲剽竊連訊客戶案例的違法行為,連訊將追究法律責任!
詳情請致電連訊公司:0755-83999818