Automated inspection within the Versiv/TFS platform is in accordance with IEC 61300-3-35 Ed.1. This standard does not cover the automated inspection of MPO/MTP end faces. As a result, you cannot use the automated inspection feature in the Versiv/TFS for MPO/MTP end faces. You can of course still inspect the end faces using the correct tip.
MPO/MTP inspection and IEC 61300-3-35 Ed.1
MPO/MTP inspection and IEC 61300-3-35 Ed.1
本文關鍵字: IEC 61300-3-35 Ed.1, MPO, mtp
原創標題:MPO/MTP inspection and IEC 61300-3-35 Ed.1
原文鏈接:http://m.qqmmqq.cn/archives/iec-61300-3-35-ed-1.html
版權說明:本文為深圳市連訊達電子技術開發有限公司官網(m.qqmmqq.cn)版權所有。如果您需要轉載,請注明出處并保留原文鏈接!如為轉載文章會注明文章出處,轉載文章不代表本公司觀點。對于某些同行無恥惡意抄襲剽竊連訊客戶案例的違法行為,連訊將追究法律責任!
詳情請致電連訊公司:0755-83999818